Author Topic: TE-108 • Rolling Technique  (Read 16744 times)

0 Members and 1 Guest are viewing this topic.

Offline Bootstrap

  • Stadium Superstar
  • ******
  • Posts: 2176
  • Good Vibes 64
  • Never yield.
    • The Tale Of Bootstrap
Re: TE-006 • Rolling Technique
« Reply #15 on: March 05, 2012, 12:36:13 pm »
Nothing wrong with another string ringing out if that is your intention - but you should also be able to a) play a note for its intended length and, b) play clean notes.

When you shift notes on the same string you do this automatically - when you shift strings you need to mute. For bigger than a single string jump down, you generally use the palm of your picking hand - for a bigger than single string jump up, you can often use the underside of your finger or your palm. On adjacent strings using the rolling technique is not only efficient in terms of speed, it also gives you another option for muting.

If you practice all forms of muting, you just tend to automatically use the most efficient method when playing. The unintended ringing strings aren't generally as noticeable on an unplugged acoustic, but plug it in, or crank the volume up on an electric guitar and they can sound dreadful.

As for your barres - all the strings will be notes from the chord you are playing (even the ones forming the barre) - you may want them all to ring out - very different to playing single notes. If you don't want all of the strings to ring out on barres, you can add pick control to one of your muting techniques.

Welcome to the forum :)
The best guitar is the one you have in your hands
Road Case last update 11 Mar 2012


  • Guest
Re: TE-006 • Rolling Technique
« Reply #16 on: March 06, 2012, 09:26:42 am »
Thank you for the sane and logical answer :) it helped! And thanks for the welcome!


Get The Forum As A Mobile App